Project Dell Dimension XPS H266 part 2.

Hello all. This is part 2 of my story of getting a Dell Dimension XPS H266 up and running again. With this computer i also got another old computer, A Dell Dimension 486/33 desktop PC which also didn't work when i got it and still doesn't. I think it has some sort of BIOS problem but that another story. I stripped it of most of the non-important hardware and that left me with a ISA sound card, an ISA scanner controller card, another CD-ROM drive and a IDE cable.

Now seeing as the XPS H266 only had a onboard sound card intergrated on the motherboard i thought seeing as it has three ISA slots why not see if it works in there. So i took the side panel off the XPS, stuck the ISA sound card in a free ISA slot, put the side panel back on and proceeded to install the software drivers. As this is a old sound card that only has DOS/Win 3.1 drivers i had to install it through DOS on Win95 and once i got it all installed it worked.

Next thing i did was replace the CD-ROM drive with a CD/DVD-ROM drive that was actually in my current computer seeing as it is a ATA drive. That went well too. I decided that it would be interesting to try and install Linux on this PC as Linux runs very well on old hardware and it would be a up to date operating system so if i could figure out how to connect it to the internet i could. It took me a while to decide which distro to install but i decided on Debian in the end as it has really good hardware detection and fairly good minimum requirements too. Getting it install however wasn't easy. Because this computer didn't have any form of Ethernet (only dial-up) it was going to be interesting. After trying to install from both the first installation disc and the netinst disc which didn't work i ended up booting from PLOP boot manager on a floppy and then booting to the first installation disc on a USB stick which was installed to the USB stick using UNetbootin.

After getting Debian installed i set about trying to connect to the internet and the only way i could think of was by using a spare USB wireless dongle i have. After a while i got that working and i could connect to my wireless router and update it. I've also made it so i can SSH into it as i only have one monitor and having to switch the VGA cable around is a bit of a pain.

And thats caught you all up to where i am now. If you want to know if i do anything else with this computer then follow me on twitter as i post on there when i do these things(If i remember that is). Now on to the specs of this beast:

Dell Dimension XPS H266

CPU: Intel Pentium II with MMX running at 266MHz with a 32KB internal cache

Motherboard: Intel 440FX PCIset

Memory: 4 SIMM sockets, 2 used, 2 available. 2 32MB EDO RAM modules installed.

Expansion slots: 7, 3 PCI slots, 4 ISA slots.

Graphics card: Matrox Millennium MGA-MIL/4 PCI 4MB

sound cards: Yamaha OPL3-SA2 and SC400 Rev. 4G Sound FX Gold-16

TV card: Win/TV-PCI PAL-BG/I 60134 rev C2V

Modem: Sportster Voice 28.8 Faxmodem

Hard drive: Western Digital 8.4GB ATA

Optical drive: TSST TS492C CD-RW/DVD-ROM drive

Zip drive: Iomega zip 100 internal ATA drive

Floppy drive: NEC floppy disk drive

Fans: 1 rear 9.2cm, 2 front 6cm.

PSU: 200W

OSs: Windows 95 OSR 2.1 and Debian squeeze 6.0

And finally a few pictures of this computer:

Project Dell Dimension XPS H266 has started!

Hello all. A few weeks ago i got a old Dell Dimension XPS H266 tower PC that had the RAM go bad in it and it had no hard drive and i thought to myself this would make a great PC for old PC games that only run on DOS/Win95 so i set about first finding some RAM for it which was easier said than done and then set about finding a hard drive, not that easy either.

As this is a fairly old computer it uses 72 pin SIMM EDO modules either 16MB or 32MB in size and can take up to a maximum of 128MB of RAM. Doesn't sound like much does it? It's surprising how quick it actually is. More on that later though. So i searched the internet for days trying to find the right type of RAM and finally i found some. As usual eBay came to the rescue. I found a couple of sticks each 32MB in size. That would give me 64MB of RAM to play with. not bad.

So i got them, took the old out and put in the new and they worked! One down one to go. Next up was the hard drive and it was a bit easier to find the right one. Again as this PC is fairly old it uses the ATA IDE interface for hard drives and optical drives. eBay came good again and i found a 8.4GB Western Digital  hard drive that looked like it should work so i got that, whacked it in, turned the computer on and it was being recognised by the BIOS. Two out of two and everything was going well.

With this computer i also got Windows 95 OSR 2.1 (I think) so as Win95 can run both DOS and Windows programs i set about installing win95 on this computer. Installing Win95 was a fairly painless process and soon i was booted into Win95. I then started to update it. First i installed the latest version of DirectX that is compatible with Win95 which is DirectX 8, Then i installed the latest version of Internet Explorer that is compatible with Win95 which is IE6, I got the two USB ports working and installed the drivers for all the hardware. So i now have relatively up to date installation of Win95.

And thats the end of this blog post, Next time the story continues as i install more hardware and see what this thing is really capable of. I'll also post detailed information about the hardware and a few pictures of it.

Se you next time.

My current PC, A IBM M52 part 2

Hello again. today i'm going to talk about the insides of this computer. First a picture of it with just the top cover open:

It with the cover open, in this picture you can see the PSU, DVD drive, PCI fan and a bit of the motherboard.

to get access to the CPU, RAM, hard drive, floppy drive and front fans you need to tilt the whole front section up like this:

The front drive bay tilted all the way up.

In the drive bay we have the CD/DVD drive on top of the hard drive and next to them is the floppy drive.

The PSU is in the top left corner in the above picture with the motherboard being across the bottom. Starting from the left we have the PCI riser card with one PCI port and one ADD 2-R port that can also work as a PCI-E 1x port.

As you can see i have a PCI slot fan in the top PCI slot which is held up by a piece of metal from a video tape. This case doesn't come with any screws to hold PCI cards/fans in place so hence i used that.

Then we have the two RAM slots to the right of the PCI riser card slot. It can take a maximum of 2GB of RAM in each slot making a total of 4GB. I currently have 3GB of RAM in it which makes it a fairly quick machine.

Above the RAM we have two heatsinks, one smaller one on the left and a bigger one on the right. The smaler one on the left is over the north bridge chipset and the bigger one is for the Pentium 4 CPU. We then have the two case/CPU fans on the drive bay to the right of the CPU heatsink. These are right in front of the front grill. A bit of info about these fans:

Make: SUPERRED
Model: CHD6012ES-AH(E)
Power info: DC12V 0.30A
Connector type: 4 pin
Dimensions: 6cm - width, 2cm - depth

A close up of the two fans:

The two case/CPU fans.

I plan on replacing these two front fans with more efficient/quieter ones soon. See if i can get it to run a bit cooler and quieter. I'll finally leave you with another couple of pictures of inside it:

If you have any questions or comments about anything on my blog feel free to email me.

My current PC, A IBM M52 part 1

Hello all. Today i'm going to talk about my current PC which is a IBM M52 8215-CTO. There will be several parts to this as i keep upgrading it and i will write about my experiences with it. First a overall picture of my PC:

My Desktop and monitor on my computer desk. Yeah it's a mess.

As you can see i have a HP 1740 17" LCD monitor connected to my M52. I have a Logitech K120 keyboard which is pretty good seeing as it's a fairly cheapish one and a GAME brand mouse, again fairly basic but does the job. You can also just about see on the left a BT Voyager 1500 wireless router that i mainly use for experiments.

Next i'll show you a close up of the front:

At the bottom left is the grill for the two CPU fans, Top left is the floppy drive,
At the top right is the CD-RW/DVD Drive, At the bottom we have the headphone and microphone  jacks,
To the left of those is the two front USB 2.0 ports, the power button and the power and HDD indicator lights.

Next a picture of the back:

On the back starting from the left is the PSU fan grill, power socket, under that is the voltage switch,
Then we have the old keyboard and mouse ports, next to them is four USB 2.0 ports, A parallel port, Line in and line out audio ports, A VGA video port, two more USB 2.0 ports , a ethernet port and two serial ports.

There is also two PCI slots at the top right. As you can see the bottom one is not in use and the top one has a PCI slot fan mounted in it. Some of you may have noticed that there is small piece of metal on the right side of the PCI fan grate. I'm using that to keep the PCI fan in place. Without it the front would fall down as it doesn't fit overly well. More on the insides later though.

Finally i shall leave you with the specs of this PC as it is:

IBM M52 8215-CTO
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz HT SL7Z9
Motherboard: Custom BTX motherboard with the Intel 945G chipset
RAM: 1x Crucial 2GB DDR2-SDRAM PC2-5300 and 1x Kingston 1GB DDR2-SDRAM PC2-5300
Hard Drive: Hitachi Deskstar 7K80 series 80GB (HDS728080PLA380 40Y9028LEN)
Optical Drive: TSSTcorp CDW/DVD TS-H492C
Graphics Card: Intel(R) 82945G Express Chipset Family 212MB
Sound Card: SoundMAX Integrated Digital HD Audio
PSU: Delta Electronics DPS-225HB A 225W
Monitor: HP L1740 LCD Monitor
OS: Microsoft Windows XP Pro (2600) SP3

Quick Tech Tip #2: Clean your fans.

Hello all. Today i'm going to talk about cleaning your fans. No matter what type of computer you have keeping it cool will help prolong the life of your computer and make it a bit quieter too. One way of doing this is to clean out your fans and heatsink.

All computers will be different but they all should have at least one fan (Mainly laptops) and one heatsink (some, mostly desktops have 2 or 3 fans, maybe more). both of these can get quite dusty and when they get dusty it makes them less efficient which in turn makes your computer hotter.

I had one laptop where the fan grate on the heatsink half blocked up with dust raised the temperature about 20C so maintaining clean fans and a clean heatsink will reduce the temperature and prolong the life of your computer. The way i do this is to just take a cotton bud/swab and wipe the fan blades as well as the grates on the heatsink. make sure you can see straight through the heatsink grates and that there is nothing blocking any of them. Also make sure that the air intakes on you computer are clean as well.

And thats it for this quick tech tip. I hope this post has helped you and i'll see you next time. Till then.

Quick Tech Tip #1: Defragmenting your hard drive.

Hello all. Today i'm going to talk about defragmenting your hard drive. If your using Windows it's a smart plan to defragment your hard drive. Basically a fragmented hard drive is where a file is in multiple places on the hard drive. This can happen to many files. defragmenting your hard drive is a process that puts all of one file together on the hard drive thus making it easier and quicker for Windows to find said file.

There are many programs out there that can defrag your hard drive. There is also a built in defragger in Windows. to use the one build into Windows just do this:

1: Right click on My Computer.

2: Click on Manage.

3: Then in the left hand side pane of the window that just popped up click on Disk Defragmenter.

4: Then either click on the Analyze button to analyze your hard drive to see if it needs defragmenting or click on the Defragment button to defragment your hard drive.

I use Auslogics Disk defrag at the moment and it seem very good however there are other ones out there too.

you should defragment your hard drive every month at least. I'd recommend every two weeks just to make sure it doesn't get that bad. Some programs offer a quick defrag option that takes a lot less time that you can do every week or two.

Remember: never pay for this sort of software as most of the time it really isn't any better than the free ones.

And thats the end of this Quick Tech Tip. I hope this post helped you and i'll see you next time. Till then.

Introducing Quick Tech Tips.

Hello all. Today i'm posting about a new series of posts called Quick Tech Tips. Every so often i will post a short "tech tip" that i've learnt through my years of trying to fix computers. These will be anything related to computers really.

also a quick bit of news i've just released V0.1.5 of my Simple Text Editor. (STE) You can download it from the SourceForge page here:

http://sourceforge.net/projects/simpletxteditor/

RMQG V0.5.3 and CMDQuest released, apesstuff updated.

Hello all. I haven't posted in a while (3 months in fact) but i've finally found the time to do another post. This one is mainly news. I've released RMQG V0.5.3 (Released it a while ago actually) so you can download that at the SourceForge page here:

http://sourceforge.net/projects/rmqg/

I've also released a game called CMDQuest. It's a command line RPG. Yes thats right i finally got round to making a game. It's only the second version so it's not really playable as a actual game yet but if i can get stuck in with it hopefully it should get developed fairly quicky. Thats the theory anyway. You can find out about it and download it at the SourceForge page here:

http://sourceforge.net/projects/cmdquest/

Finally I've update apesstuff again. I've added some pictures that i've taken in GT5 using the photo mode. You can find them here:

http://sites.google.com/site/apesstuff/gaming-zone/gt5-pictures

And that all the news for now. As always if you need any PC help please visit PCHelpForum.com. A great forum for computer help. Till next time.

STE V0.1.4 released, RMQG V0.5.2 released.

Hello all. Just a quick post to say that i've released V0.1.4 of STE and V0.5.2 of RMQG. You can download RMQG here: http://sourceforge.net/projects/rmqg/ and you can download STE here: http://sourceforge.net/projects/simpletxteditor/.

Also great news! STE is now listed on Softpedia and has the 100% free award.

How To: Get the disc out of a YLOD'ed PS3

Hello all. Well my PS3 YLOD'ed again for the second time today so i thought it would be fitting to post this today. As some of you may know when a PS3 does get the YLOD (Yellow Light Of Death) if you have a game disc in at the time it won't eject because the PS3 isn't on long enough for you to get it out. I found out how to get the disc out when i phoned Sony. So i thought i'd post this up here for people who didn't know how.

To get the disc out make sure the PS3 is off at the back. Then hold the eject button down and flick the power switch on the back on. The fan should come on very fast and the disc should pop out. Be sure to grab it quickly or it will go back in.

And thats it. now you know. If you have any questions please fell free to either comment on this post or email me.